Netopia 2200 Manual do Utilizador descarregar pdf (Página 168)

100

101

168

2. If you want the ﬁlter to forward packets that match its criteria to the desti-

nation IP address, check the

Forward

checkbox.

If Forward is unchecked, packets matching the ﬁlter’s criteria will be discarded.

3. Enter the

Source IP

address this ﬁlter will match on.

You can enter a subnet or a host address.

4. Enter the

Source Mask

for the source IP address.

This allows you to further modify the way the ﬁlter will match on the source address.

Enter 0.0.0.0 to force the ﬁlter to match on all source IP addresses, or enter

255.255.255.255 to match the source IP address exclusively.

5. Enter the

Destination IP

Address this ﬁlter will match on.

You can enter a subnet or a host address.

6. Enter the

Destination Mask

for the destination IP address.

This allows you to further modify the way the ﬁlter will match on the destination

address. Enter 0.0.0.0 to force the ﬁlter to match on all destination IP addresses.

7. If desired, you can enter a TOS and TOS Mask value.

See “Policy-based Routing using Filtersets” on page 173 for more information.

8. Select

Protocol

from the pull-down menu: ICMP, TCP, UDP, Any, or the

number of another IP transport protocol (see the table on page 160).

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 350 351

Comentários a estes Manuais

Sem comentários

Netopia 2200 Manual do Utilizador Página 168

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Netopia 2200