Netopia R910 Manual do Utilizador descarregar pdf (Página 54)

9-54 User’s Reference Guide

Or, from the Main Menu, select Easy Setup. The Easy Setup WAN Ethernet Conﬁguration screen appears.

Toggle Address Translation Enabled to Yes or No (Yes to enable NAT) and press Return.

For more information see Appendix B, “Understanding IP Addressing” and Appendix C, “Understanding

Netopia NAT Behavior”

4. If your ISP uses numbered (interface-based) routing, select Local WAN IP Address and enter the local WAN

address your ISP gave you. Then select Local WAN IP Mask and enter the WAN subnet mask of the remote

site you will connect to.

The default address is 0.0.0.0, which allows for dynamic addressing, meaning that your ISP assigns an

address via DHCP each time you connect. However, if you want to use static addressing, enter a speciﬁc

address.

WAN Ethernet Configuration

Address Translation Enabled: Yes

Local WAN IP Address: 0.0.0.0

TO MAIN MENU NEXT SCREEN

Set up the basic IP attributes of your Ethernet Module in this screen.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 208 209

Sem comentários

Netopia R910 Manual do Utilizador Página 54